missouri's #1 AUTO WINDOW TINTING

35% on the front driver and passenger windows/ As dark as wanted on rear sides and back glass /  no tint on windshield below the AS1 marks on the factory window (typically 5-7"s from the top of the windshield). You can click here to learn more about the laws for all states and more specifics.

Window film is a thin, multi-layered polyester material that incorporates the many different layers to control different properties, including Ultra-Violet (UV) light, heat, glare, and privacy. Window film comes in a variety of performance levels and shades.

The many benefits of window film include eye comfort, UV protection, aesthetics, and increased safety, privacy, and energy savings.

Film percentages stand for light transmission or the amount of light that is allowed through the film. The lower the percentage, the darker the film.

No. Window film is installed on the inside of the glass. This allows for maximum durability.

No, window film and a car’s rear defroster will not affect one another.

The amount of time it would take to tint your vehicle depends on the vehicle type. A complete car can take anywhere from two to four hours. Full-sized trucks generally take about an hour or so. If you are interested in only tinting the two front doors, thirty to forty minutes is usually satisfactory. If your vehicle has old film that needs to be removed, this process adds about two to four additional hours to the film installation. These time estimates are for ideal situations; as with anything, things may happen that can extend window film installation time. Please keep this in mind when making your appointment.

The moisture that remains between the film and the glass after installation can cause a hazy, streaky, blotchy appearance. It takes several days for the adhesive/film to completely cure. The remaining moisture will evaporate through the film; depending on the type of film, this process may take a couple of days or even a couple of months. When the water evaporates completely, your windows should have excellent clarity.

We recommend that you leave your vehicle windows rolled up for 3-5 days after the window film installation. This allows the film to cure and adhere to the glass before the window is moved.

After window film installation, wait a week before cleaning the inside of the window where the film was installed. After a week, use a window cleaner without ammonia and a soft cloth or rubber squeegee. We recommend foam cleaners because they do not streak, and are usually ammonia-free. Never scrape the film with any type of blade or clean your tinted windows with anything abrasive, as it will scratch the film.

The window film used by The Tint Guys at Sound Performance is color stable film, thus carrying a lifetime warranty that guarantees no color change. This means that our window films do not turn purple like the cheap films sold in other shops or auto parts stores. Please see our Lifetime Limited Warranty for more information.

Old film will need to be removed before installation of new window film. It is always best to have the old film removed by a professional, as the vehicle’s rear defroster can be easily damaged. There is an additional charge for removal of old film, and the process adds about two to four hours to the window film installation process. If your vehicle has old film that will require removal before installing new film, it is best to drop your vehicle off in the morning and let us call you when the job is completed.

Damaged window film cannot be repaired, but the damaged piece of film can be removed and the glass can be retinted.

Yes. However, having this level of window film on front doors is not legal in Missouri. Vehicle factory window tint is usually 26%-15% film level. Missouri law states that front door legal light transmission is 35%, which is lighter than the rear window of your factory tinted vehicle.

Yes. As long as it is factory window tint, we can install window film directly on the glass. Factory window tint’s color is actually a pigment in the glass. Aftermarket window film also has many more solar benefits than factory window tint. Factory tint only rejects part of the UV rays, and only rejects a small amount of heat. Aftermarket window film rejects 99% of ultraviolet rays and between 35%-60% of heat, depending on the film level used. In addition to these benefits, darkening factory tinted glass will give you more privacy for storing your personal items in the back of the vehicle.

No, window film does not prevent glass from breaking. Window film does increase the safety of the glass; due to a very aggressive adhesive, the film helps to hold the pieces of broken glass together. In the event the glass breaks, due to an auto accident, a person running into it, or an attempted break-in, the glass will shatter, but in most instances, the film will help keep the glass together.

Yes, window film adds a degree of shatter resistance to the glass areas of your home, building, or vehicle. These films bond to glass and help hold dangerous glass fragments in place, should breakage occur due to an accident, natural disaster, or illegal entry.

Yes. The same sun that brightens a room’s interior can be detrimental to fabrics, furnishings, artwork, and rugs. Ultraviolet rays are the main cause of both fade and deterioration. Window films can screen out 99% of the damaging UV rays that can fade richly colored furniture, tapestries, and artwork. Heat and light also play a part in fading, but using window film to block nearly 100% of UV rays will increase the life of your personal property for years.

No. Window film should only be applied to glass surfaces that have a smooth finish since the adhesive is meant to adhere to glass only. Plastics, Plexiglass, or Lexan contain too much oil for the film to adhere properly for a long period of time.